15. December 2023
Henriette zu Doha
PFAS | Pyrolysis | Sewage Sludge | soil remediation | Uncategorized

Pyro­lysis not only elimi­nates PFAS from sewage sludge, the biochar also absorbs PFAS in conta­mi­nated soils

Per- and poly­fluo­ri­nated alkyl subs­tances (PFAS), also known as the Forever Chemi­cals, are a large chemical family of over 4,700 highly persis­tent chemi­cals that don’t occur in nature. PFAS are the most persis­tent synthetic chemi­cals to date. They hardly degrade in the natural envi­ron­ment and have been found in the blood and breast­milk of people and wild­life all round the world. PFAS tend to conta­mi­nate water, food chains, and soils at trace levels for generations.

Sources of PFAS conta­mi­na­tion include paper mills, land­fills, fire­fighting trai­ning faci­li­ties and fluo­ro­che­mical plants. After decades of use, PFAS are ubiqui­tous in soils, ground­water and surface water. This puts pres­sure on waste­water treat­ment plants to adequa­tely treat waste streams to prevent further spread of PFAS chemi­cals and increases pres­sure to reme­diate conta­mi­nated soils. This is where biochar comes into play.

Source: https://www.lemonde.fr/en/les-decodeurs/article/2023/02/23/forever-pollution-explore-the-map-of-europe-s-pfas-contamination_6016905_8.html

Scien­tific rese­arch has demons­trated that PFAS are elimi­nated by the process of pyro­lysis. Kundu et al. (2021) found that > 90 % of PFOS and PFOA in sewage sludge were destroyed in a pyro­lysis-combus­tion inte­grated process. Evidence from the US EPA Office of Rese­arch and Deve­lo­p­ment (2021) carried out on the US-based company Bioforcetech’s commer­ci­ally installed PYREG pyro­lysis plant shows that pyro­lysis at 600 °C for 10 minutes and combus­tion of pyro­lysis gases at 850 °C elimi­nate PFAS from sewage sludge. Biof­orce­tech (2021) has reported 38 PFAS compounds that were all kept at or removed to below detec­tion limit in the biochar in their pyro­lysis and pyro­lysis gas burning process. At the Fåre­vejle waste­water treat­ment plant in Denmark, sewage sludge pyro­lysis at a tempe­ra­ture of 650 °C and a resi­dence time of more than 3 minutes has showed to elimi­nate all 7 PFAS compounds previously detected in the feedstock.

In addi­tion to PFAS destruc­tion Biochar made from sludges, used as a sorbent, binds already exis­tent conta­mi­nants due to his high surface and proper­ties. What is a sorbent ? Previous studies have postu­lated that high surface area, poro­sity, and high carbon content are important for the sorp­tion of organic pollut­ants (Ahmad et al., 2014, Corne­lissen et al., 2005; Hale et al., 2016; Zimmerman et al., 2004 ). Nowa­days, acti­vated carbon (AC), gene­rally from fossil coal sources such as anthr­acite, is the most commonly used sorbent for soil reme­dia­tion due to its high poro­sity and high carbon content (Hage­mann et al., 2018). Biochar is an alter­na­tive to acti­vated carbon, which can be costly and chemical and energy inten­sive to produce (Ahmed et al., 2019). The main advan­tage of biochar over AC is its greater sustaina­bi­lity, as demons­trated by an endpoint life cycle analysis (Spar­revik et al., 2011) due to its poten­tial for carbon sequestra­tion (Smith, 2016) and reduced use of chemi­cals (Zheng et al., 2019). Biochar is often produced from wood-based sources (Hale et al., 2016). However, from a circular economy perspec­tive, it is at least as attrac­tive to use lightly conta­mi­nated waste such as sewage sludge as a substrate for the produc­tion of biochar sorb­ents. Pyro­lysis of sewage sludge to biochar is the possi­bi­lity of a more sustainable waste manage­ment alter­na­tive to land­fill or inci­ne­ra­tion, as it would remove many of the conta­mi­nants present in the sludge, inclu­ding much of the PFAS (Sajjadi et al., 2019), and produce a sorbent for PFAS.

Sewage sludge biochars as effec­tive PFAS-sorbents

In May 2023, there was now a ground­brea­king study showing that biochar from raw and digested sewage sludge can be used as an effec­tive sorbent for PFAS in most envi­ron­mental contexts, with similar or better effi­ci­en­cies than AC. This study is performed with biochar produced at Lindum AS (Drammen, Norway) by slow pyro­lysis at 700 °C and a resi­dence time of 20 minutes for WCBC and SSBC2 and 40 minutes for SSBC1 using Biogreen tech­no­logy. “High poro­sity in the right size range and carbon content were probably the main para­me­ters respon­sible for the high sorp­tion strength observed in the sludge-derived biochars, toge­ther with some possible influence of amine func­tional groups.” (Krahn, Corne­lissen et al. 2023).

Accor­ding to Prof. Cornelissen’s rese­arch team, further studies should examine a larger range of biochar samples prepared at diffe­rent pyro­lysis tempe­ra­tures to iden­tify the charac­te­ristics ideal for PFAS sorp­tion, such as surface area, pore volume, carbon content and mineral content (mainly Ca and Fe). Finally, studying the effect of acti­va­tion of sludge chars on sorp­tion strength could be useful for further impro­ving their sorp­tion properties.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

DAS KÖNNTE SIE AUCH INTERESSIEREN

What exactly are carbon removal credits and how do they work?

What exactly are carbon removal credits and how do they work?

WHAT ARE CARBON CREDITS? A carbon credit is a tradeable unit representing the avoidance, reduction or removal of one metric ton of CO2e from the atmosphere. Organizations and individuals can use these credits to oset their greenhouse gas...